Renewable Energy Assisted High Temperature Heating System for Plastic to Fuel Conversion Unit

K. R. Bharath, Sarada Balaram

Abstract


Exponential rise in the use of automobile, electronic, electrical and FMCG products combines the presence of various grades of plastic materials along with them. This trend resulted in depleting the natural ecosystem of mother earth, as these plastic materials are dumped as landfills or reach water bodies, which in turn destroys the natural ecosystem, thereby backfiring a negative result to humans. Pyrolysis is a technique that can be used for converting such plastic materials into inflammable fuels. But this mechanism is an energy-intensive method which makes this method of fuel generation out of reach from the commercial space. In order to tackle this issue, high heat demanded for the pyrolysis process is harnessed from renewable sources, thereby limiting the need of an external entity for sourcing the initial heat demand. This paper proposes a method that can be used for utilizing electrical energy from renewable resources to provide a kick start for the pyrolysis process which in turn converts plastic to inflammable fuel. 

Keywords


Pyrolysis; MPPT; Green Energy; Plastic to fuel; Solar energy

Full Text:

PDF

References


P. Hapeman et al., "Community Approaches To Recycling Plastics," 2019 IEEE Global Humanitarian Technology Conference (GHTC), Seattle, WA, USA, 2019, pp. 1-7, doi: 10.1109/GHTC46095.2019.9033108

S. Ramesh, “A practical solution to plastic waste problem (next major energy source),†in OCEANS 2018 MTS/IEEE Charleston, Oct 2018, pp. 1–5.

S. H. Shah, Z. M. Khan, I. A. Raja, Q. Mahmood, Z. A. Bhatti, J. Khan, A. Farooq, N. Rashid, and D. Wu, “Low temperature conversion of plastic waste into light hydrocarbons,†Journal of Hazardous Materials, vol. 179, no. 1, pp. 15 – 20, 2010.

D. W. C. Michailos, S. Parker, “Comprehensive design of a fast pyrolysis reactor for waste utilization,†International Journal of Renewable Energy Research, vol. 7, pp. 1613–1620, 2017.

S. K. Tulashie, E. K. Boadu, and S. Dapaah, “Plastic waste to fuel via pyrolysis: A key way to solving the severe plastic waste problem in ghana,†Thermal Science and Engineering Progress, vol. 11, pp. 417 – 424, 2019.

Y. Ikuta, M. Iji, D. Ayukawa, and S. Shibano, “A pyrolysis-based technology for recovering useful materials from ic package molding resin waste,†in Proceedings of the 1996 IEEE International Symposium on Electronics and the Environment. ISEE-1996, May 1996, pp. 124–129

Kanakasabapathy P, V. K. Gopal, Abhijith V, A. Mohan, and E. H. S. Reddy, “Energy management and control of solar aided ups,†in 2015 International Conference on Technological Advancements in Power and Energy (TAP Energy), June 2015, pp. 363–368.

Preethishri R.S. and K. K. Selvi, “The photovoltaic module fed push pull converter with mppt controller for solar energy applications,†in 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), July 2016, pp. 1–4.

M. T. Penella and M. Gasulla, “A simple and efficient mppt method for low-power pv cells,†International Journal of Photoenergy, vol. 2014.

Vineeth Kumar P. K. and Asha C. A., “An efficient solar power converter with high mpp tracking accuracy for rural electrification,†in 2014 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC), April 2014, pp. 383–389.

M. Fisher, T. Kingsbury and L. Headley, "Sustainable electrical and electronic plastics recycling," IEEE International Symposium on Electronics and the Environment, 2004. Conference Record. 2004, Scottsdale, AZ, USA, 2004, pp. 292-297, doi: 10.1109/ISEE.2004.1299732.

M. N. Siddiqui, “Conversion of hazardous plastic wastes into useful chemical products,†Journal of Hazardous Materials, vol. 167, no. 1, pp. 728 – 735, 2009.

F. E. Tahiri, K. Chikh, M. Khafallah, and A. Saad, “Comparative study between two maximum power point tracking techniques for photovoltaic system,†in 2016 International Conference on Electrical and Information Technologies (ICEIT), May 2016, pp. 107–112.

Miandad, Rashid, Rehan, Mohammad, Barakat, Mohammad A.,Aburiazaiza, Asad S. and Khan, Hizbullah, Ismail, Iqbal M. I.,Dhavamani, Jeya, Gardy, Jabbar, Hassanpour, Ali Nizami and Abdul-Sattar, “Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries,†in Frontiers in Energy Research, Vol. 7, pp 27, Year 2019.

IEEE Standard, Test Code, and Recommended Practice for Induction and Dielectric Heating Equipment," in IEEE Std No 54-1955, vol., no., pp.1-24, 7 March 1955, doi: 10.1109/IEEESTD.1955.7430213.

Mihnea Rosu-Hamzescu, Sergiu Oprea, “Practical Guide to Implementing Solar Panel MPPT Algorithmsâ€, Microchip Technology Inc, Application Note, AN1521, May 2013

T. Esram and P. L. Chapman, "Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques," IEEE Transactions on Energy Conversion, vol. 22, no. 2, pp. 439-449, June 2007

J. Ahmad, "A fractional open circuit voltage based maximum power point tracker for photovoltaic arrays," Software Technology and Engineering (ICSTE), 2010 2nd International Conference on, San Juan, PR, 2010, pp. V1-247-V1-250

A. Sandali, T. Oukhoya and A. Cheriti, "Modeling and design of PV grid connected system using a modified fractional short-circuit current MPPT," 2014 International Renewable and Sustainable Energy Conference (IRSEC), Ouarzazate, 2014, pp. 224-229, doi: 10.1109/IRSEC.2014.7059859.

Bharath K R and P. Kanakasabapathy, "Implementation of enhanced perturb and observe maximum power point tracking algorithm to overcome partial shading losses," 2016 International Conference on Energy Efficient Technologies for Sustainability (ICEETS), Nagercoil, 2016, pp. 62-67

M. H. Anowar and P. Roy, "A Modified Incremental Conductance Based Photovoltaic MPPT Charge Controller," 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox'sBazar, Bangladesh, 2019, pp. 1-5, doi: 10.1109/ECACE.2019.8679308.

K. R. Bharath and E. Suresh, “Design and implementation of improved fractional open circuit voltage based maximum power point tracking algorithm for photovoltaic applications,†International Journal of Renewable Energy Research, vol. 7, no. 3, pp. 1108–1113, 2017.

S. M R, S. Balaram, P. Menon, A. B, D. Pramod and B. K. R, "Plastic To Fuel Conversion System Using Renewable Energy Assisted Pyrolysis," 2020 6th International Conference on Advanced Computing and Communication Systems (ICACCS), Coimbatore, India, 2020, pp. 523-527, doi: 10.1109/ICACCS48705.2020.9074266.




DOI (PDF): https://doi.org/10.20508/ijrer.v10i4.11367.g8070

Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

Publisher: Gazi University

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Clarivate Analytics);

IJRER has been cited in Emerging Sources Citation Index from 2016 in web of science.

WEB of SCIENCE between 2020-2022; 

h=30,

Average citation per item=5.73

Impact Factor=(1638+1731+1808)/(189+170+221)=9.24

Category Quartile:Q4