Seawater Battery with Al-Cu, Zn-Cu, Gal-Cu Electrodes for Fishing Lamp

Sugeng Hari Wisudo, Adi Susanto, Mulyono Sumitro Baskoro, Mochammad Riyanto, Fis Purwangka

Abstract


The key problem in application of seawater battery is lies on the expensive cost of anode material manufacture, especially for fishing activity. Seawater battery with common electrode such as Al-Cu, Zn-Cu, Gal-Cu are expected for selecting fixed lift net application through innovation of Light Emmitting Diode (LED) fishing lamp. This research is evaluated the performance of seawater battery with various common electrodes to drive LED lamp during discharge process. Laboratory experiment was conducted on December 2016 to January 2017, in order to measure potential and current output of aluminium (Al), zinc (Zn), and galvalume (Gal) anode of seawater battery without load and load condition. The results showed the zinc anode had the higher performance in term of voltage and current output than galvalume and alumunium anode. The maximum power output of zinc (704.17 mW) was not significantly different with galvalume (726.41 mW), nevertheless these have a significant different with aluminium (175.75 mW). It was evident that the performance of seawater battery was affected by anode matter. Zinc and galvalume were sufficient enough to be developed as seawater battery anode due to their higher number of potential, current and power output. Further development of seawater battery with DC/DC converter and Dual in-line Package (DIP) LED is appropriate enough for the new innovation of an effective and efficient fishing lamp for lift net fisheries.

 


Total Views: 131

Keywords


anode; cathode; electricity; lift net; seawater battery

Full Text:

PDF

References


Z. Yang, J. Zhang, M.C.W. Kintner-Meyer, X. Lu, P. Choi, J.P. Lemmon, J. Liu, Electrochemical energy storage for green grid, Chemical Reviews, DOI: 1 0.1021/cr100290v, Vol. 111, pp. 3577-3613. 2011. (Article)

P.K. Leung, Q. Xu, T.S. Zhao, High-potential zinc-lead dioxide rechargeable cells, Electrochimica Acta, DOI: 10.1016/j.electacta.2012.06.089, Vol. 79 (2012) pp. 117-125, 2012. (Article)

P. Leung, S.C. Heck, T. Amietszajew, M.R. Mohamed, M.B. Conde, R.J. Dashwood, R. Bhagat, Performance and polarization studies of the magnesium-antimony liquid metal battery with the in-situ reference electrode, RSC Advances, DOI: 10.1039/C5RA08606J, Vol. 5, pp. 83096-83105, 2015. (Article)

Y. Kim, H. Kim, S. Parka, I. Seob, Y.Kim, “Na ion- Conducting Ceramic as Solid Electrolyte for Rechargeable Seawater Batteries”, Electrochimica Acta, DOI: 10.1016/j.electacta.2016.01.054, Vol. 191, pp. 1-7, 2016a. (Article)

P. Leung, J. Palma, E. Garcia-Quismondo, L. Sanz, M.R. Mohamed, M. Anderson, “Evaluation of electrode materials for all-copper hybrid flow batteries”, Journal of Power Sources, DOI: 10.1016/j.jpowsour.2015.12.069, Vol. 310, pp. 1-11, 2016. (Article)

Z. Hongyang, B. Pei, J. Dongying, “Electrochemical performance of magnesium alloy and its application on the sea water battery”, Journal of Environmental Sciences, Supplement, pp.S88–S91, 2009. (Article)

K. Yu, H.-Q. Xiong, L. Wen, Y.-L. Dai, S-H. Yang, S-F. Fan, F. Teng, X-Y. Qiao, “Discharge behavior and electrochemical properties of Mg-Al-Sn alloy anode for seawater activated battery”, Transactiono of Nonferrous Metals Society of China, DOI: 10.1016/S1003-6326(15)63720-7, Vol. 25, pp. 1234-1240, 2015. (Article)

J. P. Iudice de Souza and W. Vielstich, “Seawater aluminum/air cells in Handbook of fuel cells –fundamentals, technology and applications”, Edited by Wolf Vielstich, Hubert A. Gasteiger, Arnold Lamm and Harumi YokokawaJohn Wiley & Sons, Ltd. pp 1-7. Ch 1. 2010 (Book)

A. Susanto, M. S. Baskoro , S. H. Wisudo, M. Riyanto, F. Purwangka, “Performance of Zn-Cu and Al-Cu electrodes in seawater battery at different distance and surface area”, International Journal of Renewable Energy Research, Vol. 7, pp. 288-303, 2017. (Article)

Kehayias,, D. Bouliopoulos, N. Chiotis, P. Koutra, “A photovoltaic-battery-LED lamp raft design for purse seine fishery: application in a large Mediterranean Lake”, Fisheries Research, doi: 10.1016/j.fishres.2016.01.003, Vol. 177, pp. 18–23, 2016. (Article)

J-K Kim, F. Mueller, H. Kim, S. Jeong, J-SPark, S. Passerini, Y. Kim, “Eco-friendly energy storage system: seawater and ionic liquid electrolyte”, ChemSusChem, DOI: 10.1002/cssc.201501328, Vol. 9, pp. 42 –49, 2016b. (Article)

Y. Matsushita, T. Azuno, Y. Yamashita, “Fuel reduction in coastal squid jigging boats equipped with various combinations of conventional metal halide lamps and low-energy LED panels”, Fisheries Research, DOI: 10.1016/j.fishres.2012.02.004, Vol. 125-126, pp. 14-19. August 2012. (Article)

S. C. Shen, C. Y. Kuo, M-C. Fang, “Design and analysis of an underwater white LED fish-attracting lamp and its light propagation”, International Journal of Advanced Robotic Systems. DOI: 10.5772/56126, Vol. 10, pp. 1-10, 2013. (Article)

L. T. Hua, J. Xing, “Research on LED fishing light”, Research Journal of Applied Science, Engineering and Technology, Vol. 5, pp. 4138-4141, April 2013. (Article)

M. F Lai, N. D. G. Anh, J. Z. Gao, H. Y. Ma, H Y. Lee, “Design of multi segmented freeform lens for LED fishing/working lamp with high efficiency”, Applied Optics, DOI: 10.1364/AO.54.000E69, Vol. 54, pp. 69-74, 2015. (Article)

M. P. McHenry, D. Doepel, B. O. Onyango, U.L. Opara, “Small-scale portable photovoltaic battery-LED systems with submersible LED units to replace kerosene-based artisanal fishing lamps for sub-Saharan African lakes”. Renewable Energy, DOI: 10.1016/j.renene.2013.07.002, Vol. 62, pp. 276–284, 2014. (Article)

M. Kar, B. Winther-Jensen,, M. Forsythc, and D. R. MacFarlanea, “Exploring zinc coordination in novel zinc battery electrolytes”, Physical Chemistry Chemical Physics, DOI: 10.1039/C4CP00749B, Vol. 16, pp. 10816-10822, 2014. (Article)

O. Hasvold, “Seawater cell with increased efficiency”, U.S. Patent 5 405 717, Apr. 11, 1995. (Patent)

J. C. Wang, “Novel green illumination energy for LED with ocean battery materials”, International Journal of Materials and Product Technology, Vol. 44, pp. 187-200, 2012a. (Article)

B. Mandal, A. Sirkar, A. Shau, P. De, P. Ray, “Effects of geometry of electrodes and pulsating DC input on water splitting for production of hydrogen”, International Journal of Renewable Energy Research, Vol. 2, pp. 99-102, 2012. (Article)

K. V. Rao, “Performance evaluation of Mg-AgCI batteries for underwater propulsion”, Defence Science Journal, Vol. 51, pp. 161-170, 2001. (Article)

C. P. Grey, J. M. Tarascon, “Sustainability and in situ monitoring in battery development”, Nature Material, DOI:10.1038/NMAT4777, Vol. 16, pp. 45-12, 2016. (Article)

M. M. Ghangrekar, V. B. Shinde, “Performance of membrane-less microbial fuel cell treating wastewater and effect of electrode distance and area on electricity production”, Bioresource Technology, DOI: 10.1016/j.biortech.2006.09.050, Vol. 98, pp. 2879–2885, 2007. (Article)

S. Ramakanth, “Cheaper electrodes having higher efficiency using salt water and salt vinegar electrolytes”, International Journal of Innovative Research and Development, Vol. 1, pp. 310-322, 2012. (Article)

R. Hahn, J. Mainert, F. Glaw, K. D. Lang, “Sea water magnesium fuel cell power supply”, Journal of Power Sources, DOI: 10.1016/j.jpowsour.2015.04.119, Vol. 288, pp. 26-35, 2015. (Article)

N. Ueoka, N. Sese, M. Sue, A. Kouzuma, K. Watanabe, “Sizes of anode and cathode affect electricity generation in rice paddy-field microbial fuel cells”, Journal of Sustainable Bioenergy Systems, DOI: 10.4236/jsbs.2016.61002, Vol. 6, pp. 10-15, 2016. (Article)

E. K. Butler, “Sea water battery comprising a capacitor within the battery electrolyte port and a method of minimizing intercell short circuits”, U.S. Patent 3,630,782, December 28, 1971. (Patent)

H. N. Honer, “Multicell seawater battery,” U.S. Patent 3,953,238, April 27, 1976. (Patent)

P. K. Church, A. G. Philips, “Rechargeable electrical storage battery with zinc anode and aqueous alkaline electrolyte”, U.S. Patent 4,372,823, February 8, 1983. (Patent)

M. Dornajafi, M. B. Proctor, D. A. Lowy, Z. Dilli, M. C. Peckerar, “Zinc-water battery and system,” U.S. Patent US 2013/0108935 A1, May 2, 2013. (Patent)

Y. Li, “Corrosion behaviour of hot dip zinc and zinc–aluminium coatings on steel in seawater, Bulletin Material Science, Vol. 24, pp. 355–360, 2001. (Article)

A. P. Yadav, A. Nishikata, T. Tsuru, “Electrochemical impedance study on galvanized steel corrosion under cyclic wet–dry conditions influence of time of wetness”, Corrosion Science, DOI: 10.1016/S0010-938X(03)00130-6, Vol. 46, pp. 169–181, 2004. (Article)

Z. Chen, C.T. Peng, Q. Liu, R. Smith, D. Nolan, “A new quaternary phase observed in a laser treated Zn–Al–Mg–Si coating”, Journal of Alloys and Compounds, DOI: 10.1016/j.jallcom.2013.11.216, Vol. 589, pp. 226–229, 2014a. (Article).

P. Qiu, C. Leygraf, I. O. Wallinder, “Evolution of corrosion products and metal release from galvalume coatings on steel during short and long-term atmospheric exposures”, Materials Chemistry and Physics, DOI: 10.1016/j.matchemphys.2012.01.054, Vol. 133, pp. 419– 428, 2012. (Article)

C. P. Wales, C. Simon, S. Schuldiner, “Anodes of Al alloyed with Zn for seawater batteries”, Elektrochemica Acta, Vol. 20. pp, 895-901, 1975. (Article)

PK. Shen, A.C.C. Tseung, “Development of an aluminium/sea water battery for subsea applications”, Journal of Power Sources, Vol. 47, pp. 119-127, 1994. (Article)

C.J. Lan, T.S. Chin, P.H. Lin, T.P. Perng, “Zn-Al alloy as a new anode-metal of a zinc-air battery”, Journal of New Materials for Electrochemical Systems, Vol. 9, pp. 27-32, 2006. (Article)

J. C. Wang, “LED with Ocean Battery”, Advanced Materials Research, DOI: 10.4028/www.scientific.net/AMR.378-379.646, Vol. 378-379, pp. 646-649, 2012b. (Article)

S-S. Chen, C-W Hu, I-F Yu, Y-C Liao, J-T Yang, “Origami paper-based fluidic batteries for portable electrophoretic devices”, Lab Chip, DOI: 10.1039/c4lc00091a, Vol. 14, pp. 2124-2130, 2014b. (Article)

K. Vuorilehto, “An environmentally friendly water-activated manganese dioxide battery”, Journal of Applied Electrochemistry, Vol. 33, pp. 15–21, 2003. (Article)

Y. Lv, M. Liu, Y. Xub, D. Cao, J. Feng, ”The electrochemical behaviors of Mg-8Li-3Al-0.5Zn and Mg-8Li-3Al-1.0Zn in sodium chloride solution”, Journal of Power Sources, DOI: 10.1016/j.jpowsour.2012.09.088, Vol. 225, pp. 124-128, 2013. (Article)

J. Li, K. Wan, Q. Jiang, H. Sun, Y. Li, B.Hou, L. Zhu, M. Liu, “Corrosion and Discharge Behaviors of Mg-Al-Zn and Mg-Al-Zn-In Alloys as Anode Materials”, Metals, DOI:10.3390/met6030065, Vol. 6, pp. 1-14, 2016. (Article)

M. Shinoharaa, E. Araki, M. Mochizuki, T. Kanazawa, K. Suyehiro, “Practical application of a sea-water battery in deep-sea basin and its performance”, Journal of Power Sources, DOI: 10.1016/j.jpowsour.2008.10.105Vol. 187, pp. 253–260, 2009. (Article)

T. Garshol, O. Hasvold, “Galvanic seawater cell”, US Patent 5,427,871, Juny 27, 1995. (Patent)

Z. Rehman, I. Al-Bahadly, S. Mukhopadhyay, “Multiinput DC–DC converters in renewable energy applications - An overview”, Renewable and Sustainable Energy Reviews, DOI: 10.1016/j.rser.2014.08.033, Vol. 41, pp. 521–539, 2015. (Article)

J. B. Oekerman, “Seawater battery having magnesium or zinc an ode and manganese dioxide cathode”, US Patent 3,433,678, March 18, 1969. (Patent)

Y. Inoue; M. Inagawa, “Seawater electric power system”, US Patent 6,168,882 B1, January 2, 2001. (Patent)

H. Kobashi, M. Oshitani, “Seawater activated batteries: magnesium”, Encyclopedia of Electrochemical Power Sources. 156-163. 2013. (Article.)


Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

www.ijrer.org

ijrereditor@gmail.com; ilhcol@gmail.com;

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Thomson Reuters)