Assessment and Remodelling of a Conventional Building into a Green Building Using BIM

K. S. Abhinaya, V.R. Prasath Kumar, L. Krishnaraj

Abstract


The demand for sustainable buildings has been highly increasing over the past few years. To meet the sustainability requirements of a building, changes or decisions must be made to a building during the design and preconstruction stages. This can be possible using Building Information Modelling (BIM). To demonstrate the use of BIM in sustainable design, a villa is taken for model study. The conventional building performance is analysed using Autodesk Revit which included various parameters like energy use intensity, lifecycle energy use/cost, annual carbon emissions, monthly heating and cooling loads, monthly peak demand and monthly electricity and fuel consumption. By employing the use of green materials in the conventional building model, the conventional building model is modified into a green building model. Using BIM, the use of artificial resources can be greatly reduced by replacing them with the use of renewable energy resources thereby saving energy. To show how efficient BIM is, the results of the performance of the conventional and green building models are compared. BIM has proved to be efficient in achieving sustainability with earlier decision making and rectification of errors.  


Total Views: 101

Keywords


building information modelling; building performance analysis; energy efficiency; green building; energy saving; sustainability

Full Text:

PDF

References


M. Solla, L.H. Ismail, and R. Yunus, “Investigation on the Potential of Integrating BIM Into Green Building Assessment Tools”, ARPN Journal of Engineering and Applied Sciences, Vol.11, No.4, pp. 2412-2418, 2016.

P. Rajendran, S.T. Wee, and G.K. Chen, “Application of BIM For Managing Sustainable Construction”, Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012, Renaissance Hotel, Melaka, Malaysia, pp. 305 – 310, 18-19 Dec 2012.

S.M. Raffee, Z. Hassan, and M.S.A. Karim, “Enhancement of Sustainability Assessment of Building Projects Using Building Information Modelling (BIM)”, The 3rd National Graduate Conference (Natgrad2015), Universiti Tenaga Nasional, Putrajaya Campus, pp. 252-258, 8-9 April 2015.

D. Stundon, J. Spillane, J. P. B Lim, P. Tansey, and M. Tracey, “Building Information Modelling Energy Performance Assessment on Domestic Dwellings: A Comparative Study”, Proceedings for 31stAnnual ARCOM Conference, ARCOM. pp. 671-679, 2015.

F. Jalaei, and A. Jrade, “An Automated BIM Model to Conceptually Design, Analyze, Simulate, and Assess Sustainable Building Projects”, Journal of Construction Engineering, 2014.

S. Kubba, Handbook of Green Building Design and Construction: LEED, BREEAM, and Green Globes, Butterworth-Heinemann, Oxford, UK, 2012.

B. Becerik-Gerber, and S. Rice, ‘The perceived value of building information modeling in the U.S. building industry”, Journal of Information Technology in Construction, vol. 15, pp. 185–201, 2010.

P. Dahl, M. Horman, T. Pohlman, and M. Pulaski, “Evaluating design-build operate- maintenance delivery as a tool for sustainability”, Proceedings of the Construction Research Congress, 2005.

K.P. Lam, N.H. Wong, A. Mahdavi, K.K. Chan, Z. Kang, and S. Gupta, “SEMPER-II: an internet-based multi-domain building performance simulation environment for early design support”, Automation in Construction, vol. 13, no. 5, pp. 651–663, 2004.

M.V. Shoubi, M.V. Shoubi, A. Bagchi, and A.S. Barough, “Reducing the operational energy demand in buildings using building information modelling tools and sustainability approaches”, Ain Shams Engineering Journal. Vol. 6, pp. 41–55, 2015.

S. Azhar, A. Nadeem, J.Y.N. Mok, and B.H.Y. Leung, “Building Information Modeling (BIM): A New Paradigm for Visual Interactive Modeling and Simulation for Construction Projects”, Proceedings of the First International Conference on Construction in Developing Countries “Advancing and Integrating Construction Education, Research & Practice”, Karachi, pp. 435 – 446, 4-5 August 2008.

N. Mostafavi, M. Farzinmoghadam, and S. Hoque, “Envelope Retrofit Analysis Using eQUEST, IESVE Revit Plug-in and Green Building Studio: A University Dormitory Case Study”, International Journal of Sustainable Energy, Vol. 34, No. 9, pp. 594-613, 2015.

S.S. Pimplikar, and P. Esmaeili, “Building information modelling (BIM) and sustainability—using design technology in energy efficient modelling”, IOSR Journal of Mechanical and Civil Engineering, pp. 10–21, 2012.

C. Thormark, “The effect of material choice on the total energy need and recycling potential of a building”, Building and Environment, Vol. 41, pp. 1019-1026, 2006.

Ministry of New and Renewable Energy, India, “Thermal performance of buildings”, 2012, available at http://mnre.gov.in/solar-energy/ch4.pdf [Accessed 03 March 2017].

A. Niachou, K. Papakonstantinou, M. Santamouris, A. Tsangrassoulis, and G. Mihalakakou, “Analysis of the green roof thermal properties and investigation of its energy performance”, Energy & Buildings, Vol. 33, No. 7, pp. 719–729, 2001.

J. Mohelníková, and H. Altan, “Evaluation of Optical and Thermal Properties of Window Glazing”, WSEAS TRANSACTIONS on ENVIRONMENT and DEVELOPMENT, Vol. 5, No. 1, pp. 86-93, January 2009.

Building Insulation from Indian Green Building Council, CII-Sohrabji Godrej Green Business Centre, Hyderabad, April 2008, available at https://igbc.in/igbc/html_pdfs/technical/Building%20Insulation.pdf [Accessed 17 March 2017].

J. Sierra-Perez, J. Boschmonart-Rives, A. C. Dias, and X. Gabarrell, “Environmental implications of the use of agglomerated cork as thermal insulation in buildings”, Journal of Cleaner Production, Vol. 126, pp. 97-107, 2016.


Refbacks

  • There are currently no refbacks.


Online ISSN: 1309-0127

www.ijrer.org

ijrereditor@gmail.com; ilhcol@gmail.com;

IJRER is cited in SCOPUS, EBSCO, WEB of SCIENCE (Thomson Reuters)